MAKING INFRARED WORK FOR YOU!

Email us for more information about our Thermal Imaging Cameras

WE NOW HAVE A FULL RANGE OF PORTABLE THERMAL IMAGING CAMERAS

UPTO 60Hz FRAME RATE WITHOUT WAITING FOR AN EXPORT LICENCE!

We have a comprehensive range of thermal imaging cameras including portables and online cameras. The cameras are supported by a suite of software packages for simple analysis of images to full control of production processes.

When choosing a camera it is important to ensure that it has sufficient resolution for the application. Where practical select the highest resolution possible to ensure maximum temperature data is available.
For general purpose maintenance applications a camera with a 160 x 120 pixel array detector is adequate. However for applications where accurate temperature data is required then a 320 x 240 pixel array detector is essential. With a 320 x 240 pixel array detector there are FOUR TIMES the number of pixels of a 160 x 120 pixel array. This is an important consideration since a minimum of 3 x 3 pixels are required for accurate temperature measurement.

 

Choose from the full range of Portable Thermal Imaging Cameras

From the low cost MikroSHOT Compact Camera to the High Specification M7640 camera, there is a model to suit all applications.

 

BELOW IS A SMALL SAMPLE OF THE WIDE RANGE OF CAMERAS AVAILBLE

 

MikroSHOT/MikroSHOT_B (160 x 120 Pixels)

 

The MikroSHOT is a new compact camera with integral visual camera. This easy to use camera is a breeze to use with simple controls to ensure good quality thermal images can be obtained in seconds. A special feature is the ability to measure temperature on the visul image.


MikroSHOT

 

IVN 780-P (320 x240 Pixels)

 

The IVN 780-P is a fully featured high resolution thermal imaging camera, utilising a 320 x 240 pixel array detector with a resolution of better than 0.1°C. Temperatures from -20 to 450°C (optional 1000°C) can be measured.
The IVN 780-P has a range of on board tools for immediate image analysis of live and stored thermal images. The integral flash memory can hold upto 400 images that can be easily downloaded to a PC for further analysis using the Analyser Software provided.

 

IVN 780-P

 

M7640 High Performance (640 x 480 Pixel Array Camera)

Superior performance high-quality resolution of 640 x 480 pixels, articulating 5.6” LCD and high temperature option, advanced internal analysing tools, real-time memory for movie recording, optional additional lenses and digital visual camera. Using the optional high temperature adder you can measure up to 2000°C.

640 x 480 Resolution UFPA VOX Detector
Resolution of 0.06 °C (at 30 °C 30 Hz)
Temperature Range -40 °C to 2000 °C
Focus Range of 12" (30cm) to Infinity
Real-time Image Recording
Revolutionary DualVision Image Composite Functionality
Image Transfer Using IEEE 1394 (FireWire®) Technology, USB 2.0, and Compact Flash card
Viewfinder and 5.6" Articulating LCD
Automatic Level, Gain and Focus
Multi-spot Temperature Measurement with Emissivity Settings

 

NEW!! MCS640 HIGH TEMPERATURE SHORT WAVELENGTH CAMERA

A comprehensive range of on-line thermal imaging cameras is available. From simple Hot Spot detection cameras to fully automated process optimisation and control, a suitable camera can be provided, each complimented with a choice of software packages.

We now have a range of Smart Cameras that can operate either stand alone or as part of a process control system.

 

 

The latest High Temperature Thermal Imaging Camera

MCS640

 

High Accuracy- 0.5%, Wide Temperature Spans.

 

When used for high temperature process applications, conventional thermal imaging systems are limited in accuracy and general usefulness by several factors.
Firstly, the system spectral response is normally limited to the mid-to-far infrared part of the usable spectrum, which will result in significant errors due to changes in process surface emissivity, and will make it difficult and costly, or sometimes impossible, to measure through view ports.
Secondly, images of processes which include very hot, and therefore bright areas, can be obscured by "blooming" due to saturation of the detector by the
intense energy emitted from such areas.
Finally, general purpose thermal imaging systems usually incorporate far more features than are required or desirable for process use, and this results in a larger than necessary expenditure.


The MCS640 short wavelength thermal imaging camera addresses these limitations and, in so doing, achieves a technological breakthrough in high temperature thermal imaging.

This is how:

The system is designed with a narrow band spectral response at near infrared region which minimizes measurement errors due to variations in target emissivity. Windows and viewing port materials such as quartz, Pyrex and sapphire cause minimal attenuation of infrared energy at this wavelength.
The 640 x 480 pixel array detector unit produces a high resolution, bloom-free image of high temperature targets.
Fast response, 60 frames per second, permits real time imaging of dynamic processes.

 

 

Contact us with details of your application and we will be pleased to provide you with a proposal, without obligation.

For more information on the comprehensive range of cameras available please email us with your requirements

 

WE WILL ENDEAVOUR TO RESPOND TO YOUR EMAIL ENQUIRY WITHIN 24 HOURS

MAKING INFRARED WORK FOR YOU!

 

also visit: Terrafirma Instruments

INFRARED THERMOMETERS, INFRARED PYROMETERS, PYROMETERS, THERMAL IMAGERS, PYROMETERS, THERMOMETERS, CALIBRATION, SYSTEMS, SOFTWARE
TOP OF PAGE